Howrah Pipe Fitting Store

A DRP-M, CS Reducing Tee is a carbon steel pipe fitting designed to connect three pipes, where the tee has one inlet and two outlets, or vice versa, with the outlet or inlet sizes differing. This fitting is used in various industrial applications to manage and direct flow in pipelines.

• Material: Carbon Steel (CS)
• Design: T-shaped fitting with one size reduction, allowing for different pipe diameters.
• Size Range: Available in various sizes, with the reducing outlet/inlet dimensions specified as needed.
• Pressure Rating: ANSI Class 150 to 900, capable of handling pressures up to 1000 psi.
• Temperature Rating: Suitable for temperatures ranging from -20°F to +750°F.

Commonly used in oil & gas, chemical processing, HVAC, and water systems to connect pipes of different sizes while splitting or merging the flow. It helps in managing flow direction and accommodating different pipe sizes within a single system.

• Butt-weld
• Socket-weld
• Threaded (NPT)

Compliant with industry standards such as ASTM A105 and ASME B16.9, ensuring high performance and reliability under pressure and temperature conditions.

This reducing tee is essential for creating transitions between different pipe sizes and maintaining effective flow management in various piping systems.

A DRP-M, CS Union is a carbon steel fitting designed to connect two sections of pipe with a removable, bolted connection. This type of union allows for easy disconnection and reconnection of pipes without the need for cutting or welding.

• Material: Carbon Steel (CS)
• Design: Consists of three parts—two halves with threaded or flange connections and a central nut or bolt mechanism that holds them together.
• Size Range: Available in various sizes to fit different pipe diameters.
• Pressure Rating: Typically ANSI Class 150 to 900, supporting pressures up to 1000 psi.
• Temperature Rating: Suitable for temperatures ranging from -20°F to +750°F, depending on material grade and application.

Used in oil & gas, chemical processing, HVAC, and water systems to connect and disconnect pipe sections easily for maintenance or replacement.

• Threaded: For threaded pipe connections.
• Flanged: For bolted flange connections, if applicable.

Compliant with industry standards such as ASTM A105 and ASME B16.11, ensuring reliability and performance in high-pressure and high-temperature conditions.

This union is essential for systems requiring frequent maintenance or adjustments, allowing for quick and efficient disconnection and reassembly.

A DRP-M, CS Hex Nipple is a type of pipe fitting made from carbon steel (CS), designed to connect two pipes in a straight line with a hexagonal shape that allows for easy handling and installation. The "M" likely denotes a specific series or design, while "DRP" could refer to a proprietary or standard designation.

• Material: Carbon Steel (CS)
• Design: Hexagonal shape for ease of gripping and installation.
• Size Range: Typically available in various sizes to match different pipe diameters, such as 1/4" to 6" or larger.
• Pressure Rating: ANSI Class 150 to 900, handling pressures up to 1000 psi.
• Temperature Rating: Suitable for temperatures from -20°F to +750°F, depending on the material and application.

Used in oil & gas, chemical processing, HVAC, and water systems to join two sections of pipe in a straight line. The hexagonal design facilitates installation and removal in tight spaces.

• Threaded: Typically features external threads for screwing into matching threaded pipe or fittings.

Meets standards such as ASTM A105 and ASME B16.11, ensuring reliability under high-pressure and temperature conditions.

This hex nipple is crucial for creating a continuous run in pipelines, providing a reliable connection with ease of installation.

A DRP-M, CS Cross Fitting is a plumbing/mechanical component used to connect four pipes at right angles. It's typically made of carbon steel (CS), compliant with standards like ASTM A105 or ASME B16.9.

• Material: Carbon Steel (CS)
• Size Range: Commonly from 1/4" to 24" diameter.
• Pressure Rating: ANSI Class 150 to 900, with maximum working pressure up to 1000 psi.
• Temperature Rating: Operating temperature range from -20°F to +750°F.
• End Connections: Butt-weld, threaded (NPT), or socket-weld.
• Testing: Hydrostatic, pneumatic, and non-destructive testing (NDT) like radiography.

Used in industries such as oil & gas, chemical processing, power generation, and HVAC, suitable for liquid, gas, and corrosive media. Surface finishes like galvanizing or epoxy coatings enhance corrosion resistance.

Meets international standards and certifications, including ISO, ANSI, and ASME, ensuring high performance in various environments.

This component is essential in pipelines requiring multiple directional flows and high reliability under pressure.

A DRP-M, MIGI Plug is a type of mechanical plug typically used in industrial piping systems. "MIGI" likely refers to a specific design or proprietary feature, and the plug itself is designed to block or close the end of a pipe or fitting, often for maintenance, testing, or capping purposes. It's typically made of carbon steel (CS) or other durable materials suitable for high-pressure and high-temperature environments.

• Material: Carbon Steel (CS)
• Design: Plug with a MIGI-specific design, typically threaded or welded for secure sealing.
• Size Range: Available in various sizes, depending on the pipe diameter.
• Pressure Rating: ANSI Class 150 to 900, capable of handling pressures up to 1000 psi.
• Temperature Rating: Can operate in temperatures from -20°F to +750°F, depending on material.

Used in oil & gas, chemical processing, power generation, and HVAC systems to temporarily or permanently seal pipe ends. Common for system testing, maintenance, or when an extension of the pipeline may be required in the future.

Compliant with ASTM A105, ASME B16.11, or other relevant standards, ensuring reliability in demanding applications.

This plug is critical for safely sealing off parts of the system under various operating conditions.

A DRP-M, CS Tee is a type of pipe fitting used to connect three pipes in a T-shaped configuration. This fitting is made of carbon steel (CS) and is used in various high-pressure and high-temperature industrial systems.

• Material: Carbon Steel (CS)
• Design: T-shaped fitting with three connections.
• Size Range: Available in a variety of sizes, typically from 1/4" to 24" in diameter.
• Pressure Rating: ANSI Class 150 to 900, handling pressures up to 1000 psi.
• Temperature Rating: Suitable for temperatures ranging from -20°F to +750°F.

Commonly used in oil & gas, chemical processing, power generation, and HVAC systems to branch a pipeline into two directions from a single inlet. Suitable for liquids, gases, and corrosive media.

Available with various end connections such as butt-weld, socket-weld, or threaded (NPT).

Compliant with standards such as ASTM A105, ASME B16.9, and other relevant industry standards, ensuring robust performance under high-pressure and temperature conditions.

This tee is essential for creating branching points in pipelines, ensuring effective flow management and system configuration.

A DRP-M, CS 90° Elbow is a carbon steel pipe fitting used to change the direction of flow in a pipeline by 90 degrees. It is widely used in industries requiring durable, high-pressure systems like oil & gas, chemical processing, and HVAC.

• Material: Carbon Steel (CS)
• Angle: 90° bend
• Size Range: Commonly from 1/4" to 24" diameter.
• Pressure Rating: ANSI Class 150 to 900, handling pressures up to 1000 psi.
• Temperature Rating: Suitable for temperatures from -20°F to +750°F.
• End Connections: Butt-weld, socket-weld, or threaded (NPT) ends.

Subject to hydrostatic, pneumatic, and non-destructive testing (NDT), such as radiographic inspections, to ensure integrity under pressure.

Ideal for pipelines in oil & gas, petrochemical, power generation, and HVAC systems, particularly where a 90° change in direction is required while maintaining strength and flow efficiency.

Compliant with ASTM A105, ASME B16.9, and other relevant international standards, ensuring high durability and reliability.

This component is essential for directing flow in robust industrial piping systems.

A DRP-M, CS Reducing Elbow 90° is a carbon steel pipe fitting that allows for a 90-degree change in the direction of flow while also reducing the pipe size. It is commonly used in high-pressure industrial systems requiring a directional and size change in the pipeline.

• Material: Carbon Steel (CS)
• Angle: 90° bend with a reduced outlet size.
• Size Range: Available in a variety of sizes, with one end smaller to facilitate size transitions.
• Pressure Rating: ANSI Class 150 to 900, supporting pressures up to 1000 psi.
• Temperature Rating: Suitable for operating temperatures between -20°F to +750°F.
• End Connections: Butt-weld, socket-weld, or threaded (NPT) ends.

The fitting undergoes hydrostatic, pneumatic, and non-destructive testing (NDT) to ensure performance under pressure and temperature extremes.

Used in oil & gas, chemical processing, petrochemical, and HVAC systems, where both a directional change and size reduction are necessary. Suitable for liquids, gases, and corrosive media.

Compliant with ASTM A105, ASME B16.9, and other relevant standards, ensuring long-lasting performance in critical applications.

This fitting is crucial in pipelines requiring size transitions and directional changes under demanding conditions.

A DRP-M, MIGI End Cap is a mechanical fitting used to seal the open end of a pipe, providing a permanent or temporary closure. This component is typically made of carbon steel (CS) and is designed for high-pressure and high-temperature industrial applications. The "MIGI" designation may refer to a specific design or proprietary feature enhancing its performance, such as improved sealing or easier installation.

• Material: Carbon Steel (CS)
• Design: MIGI-specific end cap, typically butt-weld or threaded for secure closure.
• Size Range: Available in various sizes to match different pipe diameters.
• Pressure Rating: ANSI Class 150 to 900, suitable for pressures up to 1000 psi.
• Temperature Rating: Operates in temperatures ranging from -20°F to +750°F, depending on material and application.

Used in oil & gas, chemical processing, power generation, and HVAC systems to cap off pipes, particularly where future extensions are possible or where temporary sealing is needed during maintenance or testing.

Complies with ASTM A105, ASME B16.9, and other industry standards, ensuring high durability and reliability under harsh conditions.

This end cap is essential for safely sealing pipe ends, preventing leaks, and maintaining the integrity of the system in both temporary and permanent scenarios.

A DRP-M, CS Reducing Cross is a specialized plumbing/mechanical fitting designed to connect four pipes at right angles, where at least one of the outlets has a reduced size compared to the others. It's made of carbon steel (CS) and adheres to standards like ASTM A105 or ASME B16.9.

• Material: Carbon Steel (CS)
• Size Range: Commonly from 1/4" to 24" for larger pipes, with reduced outlets as specified.
• Pressure Rating: ANSI Class 150 to 900, handling pressures up to 1000 psi.
• Temperature Rating: Operates between -20°F to +750°F.
• End Connections: Available in butt-weld, threaded (NPT), or socket-weld configurations.
• Testing: Hydrostatic, pneumatic, and non-destructive testing (NDT).

Used in pipelines where different pipe sizes converge, common in oil & gas, chemical, petrochemical, and HVAC systems, and suitable for liquid, gas, and corrosive media.

Meets ISO, ANSI, and ASME standards, ensuring reliability under high pressure and temperature conditions.

This fitting is vital for systems that require the transition between varying pipe sizes while maintaining structural integrity.

A DRP-M, CS Socket is a carbon steel fitting designed for socket-weld connections in industrial piping systems. The "DRP-M" likely denotes a specific series or design feature of the fitting.

• Material: Carbon Steel (CS)
• Design: Socket-weld or slip-on connection for secure, high-pressure joints.
• Size Range: Available in various sizes to match different pipe diameters.
• Pressure Rating: ANSI Class 150 to 900, suitable for pressures up to 1000 psi.
• Temperature Rating: Typically effective from -20°F to +750°F, depending on the specific application and material grade.

Used in oil & gas, chemical processing, power generation, and HVAC systems for connecting pipes. The socket-weld design allows for a strong, permanent connection by welding the pipe into the socket, ensuring a reliable seal.

• Socket-Weld: The pipe is inserted into the socket fitting and welded around the joint.
• Slip-On: The fitting slides over the pipe end and is welded around the circumference (if applicable).

Compliant with industry standards such as ASTM A105 and ASME B16.11, ensuring durability and performance under high-pressure and high-temperature conditions.

This fitting is crucial for creating robust and secure connections in high-demand piping systems.